Disassembly/Reassembly Device

[yankee2500]

Maybe he went away for the long weekend. But he did patent this product five years ago and there just being offered now.

[kjtrains]

Could be a strong possibility!       He did say in his other post that it just took some time in getting around to producing it.    

[Joe_from_NY]

while i am waiting to order mine, i was thinking of retracting the slide on mine to the right position, spraying the end of the gun with eezox and jamming the end of the gun into a glob of Bondo on the table that is semi-hardened. (Afterward I would clean off the end of the gun.) After the gun is removed, the glob of bondo will be a good shape that is necessary to retract the slide when hard. Any ideas on this? (Other than only an assh*&# would try it.)

[Sonny_Boy]

I got a response that he was going to set upo a PP account.  Sit tight.

[yankee2500]

while i am waiting to order mine, i was thinking of retracting the slide on mine to the right position, spraying the end of the gun with eezox and jamming the end of the gun into a glob of Bondo on the table that is semi-hardened. (Afterward I would clean off the end of the gun.) After the gun is removed, the glob of bondo will be a good shape that is necessary to retract the slide when hard. Any ideas on this? (Other than only an assh*&# would try it.)

Joe,

Put a piece of saran wrap or a plastic bag over the bondo first.
You could also use a piece of wood and a hand saw and drill to make your own. Cut a step in the wood and then drill holes for the barrel and recoil assembly.

[Joe_from_NY]

Joe,

Put a piece of saran wrap or a plastic bag over the bondo first.
You could also use a piece of wood and a hand saw and drill to make your own. Cut a step in the wood and then drill holes for the barrel and recoil assembly.

Thanks, Yank-
That is a better idea than Eezox. Although it appears to not be necessary now, considering the imminent acceptance of  paypal.

[yankee2500]

Not to mention the $20 price.

[DavidS]

 Re: Disassembly/Reassembly Device
« Reply #10 on: May 27th, 2011, 8:06pm »  Quote  Modify  

--------------------------------------------------------------------------------
Any answer on PAYPAL question? also it looks like it is now very easy to take the barrel out without using a tool to hold the spring, did Rohrbaugh change something in the way the R9 was built sems you always had to push the guide rod forward hold it and then lift the barrel out..with your video I am confusedtx Gman  
« Last Edit: May 27th, 2011, 11:56pm by geminidan »  IP Logged

--------------------------------------------------------------------------------
GeminiDan  


In response, Nothing has changed. This is my technique for removing and reinserting the barrel assembly.

[DavidS]

I apologize for my delay in responding to all posts. I was away for a week on vacation. I believe I responded to all e-mails concerning the device, however, if I missed ya please resend the e-mail. The PayPal account is in progress and should be completed shortly. I will keep you posted.

[tracker]

Steve's tool works well for me.

[Reinz]

With an endorsement like that, it's gotta be good!

[kjtrains]

Steve's tool works well for me.

Glad it works well!    

[tracker]

That was Steve Bedair's tool.

[kjtrains]

Still glad it works well for you, tracker.

[Reinz]

Oops!