Author Topic: Dyna-Bore Coat  (Read 3469 times)

Offline ExtremeGunCare

  • New Member
  • *
  • Posts: 8
Dyna-Bore Coat
« on: March 19, 2011, 07:40:37 PM »
If you have not heard about Dyna-Bore Coat, it is not too late.  Dyna-Bore Coat is a permanent application to your bore!  

Dyna-Bore Coat was developed to eliminate or greatly reduce all types of fouling that occurs in firearm bores. The following information describes how Dyna-Bore Coat affects different firearms.

In rifles Dyna-Bore Coat will stop or greatly reduce jacket foul. It will greatly reduce powder fouling, allowing the shooter to shoot longer strings without cleaning. It will also allow the shooter to shoot different types and brands of bullets during load development without cleaning. Cleaning is done with patches and solvent only. An average of 3 wet patches and 3 dry patches will clean the majority of treated barrels, even after strings of over 800 rounds.

In handguns Dyna-Bore Coat does for handgun bores what it does for rifles. It also makes lead fouling much easier and faster to clean. It also allows the shooter to run lead and jacketed bullets interchangeably.

In shotguns it eliminates or drastically reduces plastic wad fouling in the bore. Clean-up can be done in most cases with nothing more than a dry bore mop.

In closed breach black powder muzzle loaders using pellets and 209 primers, Dyna-Bore Coat eliminates the carbon ring build-up and allows the shooter to fire for prolonged periods without stopping to clean. Some testing has gone as long as 4,000 rounds without cleaning. It eliminates the plastic fouling in the bore caused by sabots. It also reduces leading and makes it easier to clean.

What Dyna-Bore Coat Will Do:
1. It will greatly reduce or in most cases eliminate jacket fouling.
2. It will allow you to shoot extremely long strings without cleaning.
3. You will never need a bronze bore brush in the bore again; all cleaning is done with patches and solvent. It takes an average of 4-8 patches and you’re done.
4. Dyna-Bore Coat will help protect against corrosion, both galvanic and chemical.
5. It will keep the barrel shooting up to its potential for longer periods of time.

We sell the DIY Kits for $44.95.  Check us out at http://www.extremeguncare.com


Good Shooting,

Jason Lumetta
http://www.extremeguncare.com